3WA-1700
|
Offering
top power, superior performance and full professional operating
features in a roadworthy compact chassis, the 3WA-1700 amplifier
is perfect for even the most demanding sound reinforcement installation
and touring applications. |
|
|
Other Power Amplifiers
|
|
|
|
|
|
|
Download
Manual (PDF) |
|
|
Features: |
- This 3-way amp allows you to power your left and right main speakers and your subwoofers, with no crossover necessary, all from one 2u rack chassis. The 3WA-1700 easily powers four 8 Ohm speakers for the stereo mains and two 8 Ohm subwoofers with 450W of power per channel
plus a whopping 800W for the subs! A perfect amp for DJ’s, traveling bands, and small clubs.
- Power Output Ch 1 & 2: 2 x 450W @ 4 Ohm, Subwoofer: 800W @ 4 Ohm
- Selectable internal Low Pass Filter can be adjusted from 50Hz to 250Hz to maximize the tight punch of your subs
- Filter / Source switch – to enable the internal low-pass filter and use the left and right input signals for the subwoofer – or to disable the internal filter to either use an external active crossover or use the Sub channel to pass full-range signals for monitor feeds or sound reinforcement
- Selectable Low Cut Filter to minimize muddy bass and stage rumble
- Balanced XLR and 1/4” TRS inputs;binding post (banana plug) outputs, detent volume controls for each channel
- Full safety/reliability features:4 variable speed fans for ultimate cooling; noise-free on-off; built-in DC offset;independent DC and thermal overload protection on each channel;short circuit and speaker protection
- Power ON, Signal, Clipping, and Protect LED indicators for each channel.
- Roadworthy, rugged double rack space (2U) housing
- ~115(60Hz) IEC power cord connector and 3AG fuse holder
- Power Output
Ch 1 & 2: 2 x 450W @ 4 ohms,
Subwoofer: 800W @ 4ohms
- Dimensions
(HxWxD): 3.5" x 19.0" x 17.2" (88.8 x 483 x 436mm)
- Weight: 46.2
lbs. (21Kg)
|
|