Nady PM-200A Powered Personal Stage Monitor – 150W RMS – XLR and ¼” inputs, line / speaker / headphones outputs

Nady DW-100 Digital 100-Channel Professional Wireless Microphone System – Live Stage Performance – Karaoke
June 20, 2018
Nady 4W-1KU GT Quad True Diversity 1000-Channel Professional UHF Wireless System with 4 Guitar/Instrument Bodypacks– AutoScan – Automatic Transmitter Pairing – All Metal Construction
December 11, 2018
Show all

Nady PM-200A Powered Personal Stage Monitor – 150W RMS – XLR and ¼” inputs, line / speaker / headphones outputs

Category: .

Personal onstage monitoring – Powerful amplification and great set of features – Never miss the bridge again with the PM-200A by your side!

The Nady PM-200A Powered Personal Stage Monitor is the perfect tool for monitoring audio on stage or in rehearsal. This unit puts the controls at your fingertips so you’ll never have to scream for “More Monitors!” again. The Nady PM-200A is tailored to reduce feedback while allowing vocals and instruments to stand out in the mix. Simply connect a line level feed from the main or monitor mixer to the ¼” TRS input and adjust the EQs and volume to your environment. Or connect your instrument/vocal microphone directly, before sending to the main PA, to hear yourself only.
The PM-200A can be mounted on a mic stand (with optional mic stand mount adapter), set on a keyboard, amplifier, or table for effective up-close monitoring, or used as a stage monitor with four different angled positions for optimum placement and versatility. Balanced XLR and ¼” inputs to connect a variety of audio sources. Two ¼” speaker outputs and a ¼” line output for daisy-chaining monitors or connecting to mixers and PAs. MOSFET circuitry with thermal, short circuit, and anti-thump on/off protection.


Mic Input: balanced XLR- Impedance: 2kΩ

Line Input: balanced/unbalanced TRS 1/4″ – Impedance: 20kΩ (10kΩ unbalanced)

Line Output: balanced ¼” – Output Impedance: 1.4kΩ

Headphone Output: 1/4″ TRS Stereo

EQ controls: ±12dB (High: 10kHz / Mid: 2.5kHz / Low: 120Hz)

Power Amp Output: 2 internal speakers, 2 external 1/4″ outputs

Power: 2 x 50W RMS @ 8Ω (Total 100W RMS) / 2 x 75W RMS @ 4Ω (Total 150W RMS)

Frequency Response: 20Hz – 50kHz

THD: 0.055%

S/N: -81dB

Internal Speakers: 5″ full-range – Impedance: 8Ω